Drains for bathtubs and shower trays

Multiplex Trio
Drains and overflows for bathtubs, with water supply through the overflow unit, drain hole Ø 52 mm, for use with pipe interrupter, rotatable rosette or motor operation.

Rotaplex Trio
Drains and overflows for bathtubs, with water supply through the overflow unit, drain hole Ø 90 mm, for use with pipe interrupter, rotatable rosette or motor operation.

Multiplex Trio F
Drains and overflows for bathtubs, with water supply through the drain unit, drain hole Ø 52 mm, for use with pipe interrupter, rotatable rosette or motor operation.

Rotaplex Trio F
Drains and overflows for bathtubs, with water supply through the drain unit, drain hole Ø 90 mm, for use with pipe interrupter, rotatable rosette or motor operation.

Multiplex
Drain and overflows for bathtubs, drain hole Ø 52 mm, rotatable rosette operation.

Rotaplex
Drain and overflows for bathtubs, drain hole Ø 90 mm, rotatable rosette operation.

Citaplex
Drain and overflows for bathtubs, drain hole Ø 52 mm, sealed by valve plug.

Domoplex
Drain for shower trays, drain hole Ø 52 mm, with removable odour trap.

Tempoplex
Drain for shower trays, drain hole Ø 90 mm, installation depth 60 or 80 mm, with removable odour trap.

Tempoplex Plus
Drain for shower trays, drain hole Ø 90 mm, installation depth 90 mm, with especially high drainage capacity, with removable odour trap.

Duoplex
Drain for shower trays, drain hole Ø 52 mm, with cover plate standing pipe, with removable odour trap.

Varioplex
Drain for shower trays, drain hole Ø 52 mm, with standpipe.

Note
Use of the products for areas of application and media other than those described must be agreed in consultation with Viega. Plastic products made from PP (polypropylene) are environmentally compatible and offer the best features for domestic waste water. Hot water heated only briefly to max. 95 °C may be discharged via the odour traps! Do not use chemical cleaning agents to remove pipe blockages. Use only mild cleaning agents for the surfaces. Detailed information concerning applications, limitations and national codes and standards can be found in the product documentation, either printed or on the Viega website.

Changes and errors excepted.
Latest Z- and installation dimensions as well as further technical information can be found on the Viega website and have to be checked before purchase, planning, construction work and use. Our products are continuously optimized.

This product description contains important information on choice of product and system, mounting, commissioning as well as intended use and, if required, on maintenance measures. This information on products, their features and application techniques is based on currently valid standards in Europe (e.g. EN) and/or in Germany (e.g. DIN/DVGW). Some passages in the text may refer to technical regulations in Europe/Germany. These should be considered as recommendations for other countries where no corresponding national requirements exist. The relevant national laws, standards, regulations, directives and other technical provisions take priority over the German/European directives specified in this product description: The information herein is not binding for other countries and regions and should be understood as recommendation.