Sanpress Inox
Range
General
Flow-optimised press connector system with press connectors made of stainless steel 1.4401 and pipes from stainless steel 1.4401 and 1.4521. Press connector for protecting the sealing element equipped with cylindrical pipe guide. Press connector from d64.0 with stainless steel compression ring to ensure the mechanical strength of the connection. Pipes equipped with protective pipe plug. The pressing force is located before and behind the sealing element seat. Suitable for concealed and pre-wall installations of manifold and riser pipes.
Labeling
Manufacturer, Pipe dimension, Batch, Green dot on press end, Yellow pipe plug with 1.4401, Green pipe plug with 1.4521, Detachable orange label as press indicator from d64.0
-
Show more
Inadvertently unpressed connections become visibly leaky when the system is filled.
Viega guarantees the detection of unpressed connections in the following pressure ranges:
min. water pressure: 0.1 MPa / 100 kPa / 1 bar / 14.5 PSI
max. water pressure: 0.65 MPa / 650 kPa / 6.5 bar / 94.3 PSI
min. air pressure: 22 hPa / 2.2 kPa / 22 mbar / 0.3 PSI
max. air pressure: 0.3 MPa / 300 kPa / 3 bar / 43.5 PSI
Sealing elements for press connection
EPDM (ethylene propylene diene rubber), black, pre-assembled
Dimension
d15–108.0
Tools
The functional safety of Viega press connector systems depends primarily on the faultless condition of the press tools used. Viega recommends the use of Viega press tools for pressing Viega press connectors. Viega press tools have to be regularly maintained by authorised service partners.
Areas of application
Potable water
Heating/radiator connection
Rainwater
Compressed air systems
Agriculture
Industrial uses
Note
The press connector system Sanpress Inox is suitable for the creation of potable water installations according to DIN 1988‑200 and EN 806‑2 in consideration of the selection of material in accordance with DIN EN 12502‑1 and according to the evaluation basis for metallic materials in contact with potable water of the Umweltbundesamt (UBA) (Federal Environment Agency). When used for other areas of use and when in doubt about the right selection of material, please contact Viega. When used for other areas of use and when in doubt about the right selection of material, please contact Viega. The system components should be protected against high concentrations of chloride generated by both the medium and by external factors. Detailed information concerning applications, limitations and national codes and standards can be found in the product documentation, either printed or on the Viega website.
Note – Standards and approvals
Press connector system with press connectors and pipes in accordance with DIN EN 10088 and AS 5200.053.
Australian watermark approval No.WMKA21120.
Special applications
Shipbuilding
Fire extinguishing systems
Operating conditions potable water installations
operating temperature max. 85 °C / 185 °F
operating pressure max. 1.6 MPa / 16 bar / 232 PSI
Operating conditions heating installations
operating temperature max. 110 °C / 230 °F
operating pressure max. 1.6 MPa / 16 bar / 232 PSI
Irrelevant of the direction of flow, mixed installations are permitted.
Materials press connector
Stainless steel 1.4401
Changes and errors excepted.
Latest Z- and installation dimensions as well as further technical information can be found on the Viega website and have to be checked before purchase, planning, construction work and use. Our products are continuously optimized.
Warranty
Viega Sanpress Inox carry a 25 year warranty against defects in material and workmanship.
certification
| Article Number | certificate | certificate number |
country language |
|---|
Downloads
0 Results
